周苏,陈春光,樊磊

• 1:同济大学汽车学院

摘要(Abstract)：

质子交换膜燃料电池（PEMFC）热管理子系统需要维持电堆及其它部件在适宜的温度范围内运行，对燃料电池系统的正常工作有着至关重要的作用。为跟踪其研究进展，对近年来相关研究进行了综述。首先，总结并对比了面向不同结构动力系统的热管理子系统结构。其次，总结了系统中的产热与传热问题，重点在于燃料电池电堆内部的产热与传热特性。然后，总结了应用于系统的控制策略，包括不同的控制算法和优化目标。最后，总结了相关研究方法。通过对相关研究工作对比分析，提炼了工作重点，指出并展望了未来的研究方向。

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 周苏,陈春光,樊磊

DOI: 10.19822/j.cnki.1671-6329.20220171

参考文献(References)：

• [1] ZHANG G B, JIAO K. Multi-phase Models for Water and Thermal Management of Proton Exchange Membrane Fuel Cell:A Review[J]. Journal of Power Sources, 2018, 391(7):120-133.
• [2] YUAN W W, OU K, KIM Y B. Thermal Management for an Air Coolant System of a Proton Exchange Membrane Fuel Cell Using Heat Distribution Optimization[J]. Applied Thermal Engineering, 2019, 167(9):114715.
• [3] ANDERSSON M, BEALE S B, ESPINOZA M, et al. A Review of Cell-scale Multiphase Flow Modeling, Including Water Management, in Polymer Electrolyte Fuel Cells[J].Applied Energy, 2016, 180(10):757-778.
• [4] XING L, XIANG W T, ZHU R Q, et al. Modeling and Thermal Management of Proton Exchange Membrane Fuel Cell for Fuel Cell/Battery Hybrid Automotive Vehicle[J].International Journal of Hydrogen Energy, 2021, 47(3):1888-1900.
• [5] ZHANG Q G, XU L F, LI J, et al. Performance Prediction of Proton Exchange Membrane Fuel Cell Engine Thermal Management System Using 1D and 3D Integrating Numerical Simulation[J]. International Journal of Hydrogen Energy,2017, 43(3):1736-1748.
• [6]李洁,孙铁生,张广孟,等. PEMFC发动机热管理与冷启动研究进展[J].电池, 2020, 50(4):383-387.
• [7] NOLAN J, KOLODZIEJ J. Modeling of an Automotive Fuel Cell Thermal System[J]. Journal of Power Sources, 2010, 195(15):4743-4752.
• [8] ZHAI S, SUN P T, F CHEN F X, et al. Collaborative Simulation for Dynamical PEMFC Power Systems[J]. International Journal of Hydrogen Energy, 2010, 35(16):8772-8782.
• [9] CHENG S L, FANG C, XU L F, et al. Model-based Temperature Regulation of a PEM Fuel Cell System on a City Bus.[J]. International Journal of Hydrogen Energy, 2015, 40(39):13566-13575.
• [10]赵洪波,刘杰,马彪,等.水冷PEMFC热管理系统控制策略及仿真研究[J].化工学报, 2020, 71(5):2139-2150.
• [11]周苏,俞林炯,高昆鹏,等.质子交换膜燃料电池系统中冷器建模与仿真[J].系统仿真学报, 2013, 25(4):769-773.
• [12] SUNDEN B, YUAN J L. Analysis of Proton Exchange Membrane Fuel Cell Systems Involving Heat Exchangers[J].Heat Transfer Engineering, 2013, 35(5-8):567-575.
• [13]高昆鹏,章桐,黄晨东,等. 45kW质子交换膜燃料电池发动机建模与仿真[J].同济大学学报(自然科学版), 2013,41(2):264-270.
• [14]俞林炯,陈凤祥,贾骁,等.基于Matlab/Simulink和AMESim的PEMFC冷却系统联合仿真[J].佳木斯大学学报(自然科学版), 2013, 31(3):338-342+346.
• [15]周苏,翟奇,俞林炯,等.基于单/双点线性化的质子交换膜燃料电池发动机温度预测控制研究[J].汽车工程学报, 2015, 5(3):202-208.
• [16] ZHOU S, ZHI X L, YU L J. Temperature Control of PEMFC Based on Optimal Power Consumption[C]//2019 Chinese Control Conference(CCC). Guangzhou, China:IEEE,2019.
• [17]周苏,李飞鸿,马天才,等.车用可插拔式燃料电池增程器匹配设计研究[J].汽车工程, 2011, 33(9):818-822+828.
• [18]戴海峰,党丰玲,朱维,等.插电式燃料电池车锂电池热管理系统设计[J].同济大学学报(自然科学版), 2012, 40(4):589-595+609.
• [19]李忠,李端凯,许东阳.基于氢动力系统的动力电池热管理系统设计研究[J].电子技术与软件工程, 2021(6):214-217.
• [20]卢炽华,王良旭,刘志恩,等.燃料电池汽车整车热管理系统设计与仿真分析[J].重庆大学学报, 2022(10):48-61.
• [21] REHLAENDER P, KEMPER P, SCHWUNG A, et al. A Fuel Cell Vehicle Thermal System Model[C]//2018 IEEE International Energy Conference(ENERGYCON). Limassol, Cyprus:IEEE, 2018.
• [22] REHLAENDER P, KEMPER P, SCHWUNG A, et al. Control of a Fuel Cell Vehicle Thermal Management System[C]//2018 IEEE International Energy Conference(ENERGYCON). Limassol, Cyprus:IEEE, 2018.
• [23] ZHAO Z, WANG T J, ZHANG B F, et al. Analysis of an Integrated Thermal Management System with a Heat-pump in a Fuel Cell Vehicle[J]. AIP Advances, 2021, 11(6):065307.
• [24]周苏,王克勇,文泽军,等.车用多堆燃料电池系统能量管理与控制策略[J].同济大学学报(自然科学版), 2021,49(1):107-115.
• [25] DEPATURE C, BOULON L, SICARD P, et al. Simulation Model of a Multi-stack Fuel Cell System[C]//European Conference on Power Electronics&Applications, Lille,France:IEEE, 2013.
• [26] WU D, LI K, YIN C, et al. Experimental and Modeling Study on Dynamic Characteristics of a 65kW Dual-stack Proton Exchange Membrane Fuel Cell System During Start-up Operation[J]. Journal of Power Sources, 2021, 481(1):229115.1-229115.14.
• [27] ZHOU S, FAN L, ZHANG G, et al. A Review on Proton Exchange Membrane Multi-stack Fuel Cell Systems:Architecture, Performance, and Power Management[J]. Applied Energy, 2022, 310(5):118555.1-118555.25.
• [28] XING L, CHANG H W, ZHU R Q, et al. Thermal Analysis and Management of Proton Exchange Membrane Fuel Cell Stacks for Automotive Vehicle[J]. International Journal of Hydrogen Energy, 2021, 46(64):32665-32675.
• [29] CHEN Q, ZHANG G B, ZHANG X Z, et al. Thermal Management of Polymer Electrolyte Membrane Fuel Cells:A Review of Cooling Methods, Material Properties, and Durability[J]. Applied Energy, 2021, 286(1):116496.
• [30]侯健,杨铮,贺婷,等.质子交换膜燃料电池热管理问题的研究进展[J].中南大学学报(自然科学版), 2021, 52(1):19-30.
• [31] KANDLIKAR S G, LU Z J. Thermal Management Issues in a PEMFC Stack–A Brief Review of Current Status[J]. Applied Thermal Engineering, 2009, 29(7):1276-1280.
• [32] YAN W M, CHEN F L, WU H Y, et al. Analysis of Thermal and Water Management with Temperature-dependent Diffusion Effects in Membrane of Proton Exchange Membrane Fuel Cells[J]. Journal of Power Sources, 2004, 129(2):127-137.
• [33]王乐萍,张连洪,宋海民,等.接触电阻对PEM燃料电池效率的影响[J].电源技术, 2013, 37(5):761-762+787.
• [34] BHOSALE A C, RENGASWAMY R. Interfacial Contact Resistance in Polymer Electrolyte Membrane Fuel Cells:Recent Developments and Challenges[J]. Renewable&Sustainable Energy Reviews, 2019, 115(11):109351.1-109351.15.
• [35] AGARWAL H, PANDEY R, BHAT S D. Improved Polymer Electrolyte Fuel Cell Performance with Membrane Electrode Assemblies Using Modified Metallic Plate:Comparative Study on Impact of Various Coatings[J]. International Journal of Hydrogen Energy, 2019, 45(37):18731-18742.
• [36] THANGARASU S, JUNG H Y, WEE J H, et al. A New Strategy of Carbon-Pb Composite as a Bipolar Plate Material for Unitized Regenerative Fuel Cell System[J]. Electrochimica Acta, 2021, 391(9):138921.
• [37] ZHANG R F, YANG B W, SHAO Z F, et al. Graph Theory Model and Mechanism Analysis of Carbon Fiber Paper Conductivity in Fuel Cell Based on Physical Structure[J].Journal of Power Sources, 2021, 491(4):229546.
• [38] NETWALL C J, GOULD B D, RODGERS J A, et al. Decreasing Contact Resistance in Proton-exchange Membrane Fuel Cells with Metal Bipolar Plates[J]. Journal of Power Sources, 2013, 227(4):137-144.
• [39] LIANG P, QIU D K, PENG L F, et al. Contact Resistance Prediction of Proton Exchange Membrane Fuel Cell Considering Fabrication Characteristics of Metallic Bipolar Plates[J]. Energy Conversion&Management, 2018, 169(8):334-344.
• [40]尹燕,杜青,胡亚楠.组装载荷对PEM燃料电池接触电阻及性能的影响[J].中国科技论文在线, 2010, 5(11):846-849.
• [41] CHIEN C H, HU Y L, SU T H, et al. Effects of Bolt Preloading Variations on Performance of GDL in a Bolted PEMFC by 3D FEM Analysis[J]. Energy, 2016, 113(10):1174-1187.
• [42] QIU D, H JANSSEN, PENG L, et al. Electrical Resistance and Microstructure of Typical Gas Diffusion Layers for Proton Exchange Membrane Fuel Cell under Compression[J].Applied Energy, 2018, 231(11):127-137.
• [43] WANG Y, DIAZ D F R, Chen K S, et al. Materials, Technological Status, and Fundamentals of PEM Fuel Cells-A Review[J]. Materials Today, 2019, 32(7):178-203.
• [44] WANG Q Q, LI B, YANG D J, et al. Research Progress of Heat Transfer inside Proton Exchange Membrane Fuel Cells[J]. Journal of Power Sources, 2021, 492(23):229613.
• [45]赵小军,潘凤文,王彦波,等.燃料电池封装载荷对传质传热影响的研究进展[J].电源技术, 2021, 45(5):686-689.
• [46] BURHEIM O S, ELLILA G, FAIRWEATHER J D, et al.Ageing and Thermal Conductivity of Porous Transport Layers Used for PEM Fuel Cells[J]. Journal of Power Sources,2013, 221(1):356-365.
• [47] XU G, LAMANNA J M, CLEMENT J T, et al. Direct Measurement of Through-plane Thermal Conductivity of Partially Saturated Fuel Cell Diffusion Media[J]. Journal of Power Sources, 2014, 256(6):212-219.
• [48] CHEN T, Liu S H, ZHANG J W, et al. Study on The Characteristics of GDL with Different PTFE Content and Its Effect on the Performance of PEMFC[J]. International Journal of Heat and Mass Transfer, 2019, 128(1):1168-1174.
• [49]曹涛锋,母玉同,丁靖,等.接触热阻对燃料电池温度分布影响的数值模拟[J].工程热物理学报, 2015, 36(12):2661-2665.
• [50] SADEGHIFAR H, DJILALI N, BAHRAMI M. Thermal Conductivity of a Graphite Bipolar Plate(BPP)and Its Thermal Contact Resistance with Fuel Cell Gas Diffusion Layers:Effect of Compression, PTFE, Micro Porous Layer(MPL), BPP Out-of-flatness and Cyclic Load[J]. Journal of Power Sources, 2015, 273(1):96-104.
• [51] BURHEIM O S, CRYMBLE G A, BOCK R, et al. Thermal Conductivity in the Three Layered Regions of Micro Porous Layer Coated Porous Transport Layers for the PEM Fuel Cell[J]. International Journal of Hydrogen Energy,2015, 40(46):16775-16785.
• [52] SADEGHIFAR H, DJILALI N, BAHRAMI M. A New Model for Thermal Contact Resistance between Fuel Cell Gas Diffusion Layers and Bipolar Plates[J]. Journal of Power Sources, 2014, 266(11):51-59.
• [53] BOCK R, HAMRE B, ONSRUD M A, et al. The Influence of Argon, Air and Hydrogen Gas on Thermal Conductivity of Gas Diffusion Layers and Temperature Gradients in PEMFCS[J]. ECS Transactions, 2019, 92(8):223-245.
• [54] BURHEIM O S, SU H, HAUGE H H, et al. Study of Thermal Conductivity of PEM Fuel Cell Catalyst Layers[J]. International Journal of Hydrogen Energy, 2014, 39(17):9397-9408.
• [55] CHEN L, WANG Y F, TAO W Q. Experimental Study on the Effect of Temperature and Water Content on the Thermal Conductivity of Gas Diffusion Layers in Proton Exchange Membrane Fuel Cell[J]. Thermal Science and Engineering Progress, 2020, 19(10):100616.
• [56] ZAMEL N, LITOVSKY E, LI X G, et al. Measurement of the Through-plane Thermal Conductivity of Carbon Paper Diffusion Media for the Temperature Range from 50 to+120°C[J]. International Journal of Hydrogen Energy,2011, 36(19):12618-12625.
• [57] BOTELHO S J, BAZYLAK A. The Impact of Fibre Surface Morphology on the Effective Thermal Conductivity of a Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layer[J]. Journal of Power Sources, 2014, 269(10):385-395.
• [58]秦彦周,曹世博,刘国坤,等.质子交换膜燃料电池堆冷却系统研究进展[J].汽车技术, 2021(11):1-14.
• [59]刘颖,赵洪辉,盛夏,等.燃料电池双极板机械性能设计要点综述[J].汽车文摘, 2022(12):41-47.
• [60] YU S H, SOHB S, NAM J H, et al. Numerical Study to Examine the Performance of Multi-pass Serpentine Flowfields for Cooling Plates in Polymer Electrolyte Fuel Cells[J]. Journal of Power Sources, 2009, 194(2):697-703.
• [61] RAHGOSHAY S M, RANIJBAR A A, RAMIAR A, et al.Thermal Investigation of a PEM Fuel Cell with Cooling Flow Field[J]. Energy, 2017, 134(9):61-73.
• [62] AFSHARI E, ZIAEI-RAD M, DEHKORDI M M. Numerical Investigation on a Novel Zigzag-shaped Flow Channel Design for Cooling Plates of PEM Fuel Cells[J]. Journal of the Energy Institute, 2017, 90(5):752-763.
• [63] ZHANG G S, KANDLIKAR S G. A Critical Review of Cooling Techniques in Proton Exchange Membrane Fuel Cell Stacks[J]. International Journal of Hydrogen Energy, 2012,37(3):2412-2429.
• [64] ZAKARIA I, MOHAMED W, MAMAT A, et al. Thermal Analysis of Heat Transfer Enhancement and Fluid Flow for Low Concentration of Al2O3 Water—Ethylene Glycol Mixture Nanofluid in a Single PEMFC Cooling Plate[J]. Energy Procedia, 2015, 79(11):259-264.
• [65] BARGAL M, SOUBY M M, ABDELKAREEM M, et al. Experimental Investigation of the Thermal Performance of a Radiator Using Various Nanofluids for Automotive PEMFC Applications[J]. International Journal of Energy Research,2020, 45(5):6831-6849.
• [66] ISLAM R, SHABANI B, ANDREWS J, et al. Experimental Investigation of Using ZnONanofluids as Coolants in a PEM Fuel Cell[J]. International Journal of Hydrogen Energy, 2017, 42(30):19272-19286.
• [67]周苏,纪光霁,马天才,等.车用质子交换膜燃料电池系统技术现状[J].汽车工程, 2009, 31(6):489-495.
• [68] RIASCOS L, PEREIRA D D. Optimal Temperature Control in PEM Fuel Cells[C]//Conference of the IEEE Industrial Electronics Society. Porto, Portugal:IEEE, 2010.
• [69] O'KEEFE D, El-SHARKH M Y, TELOTTE J C, et al.Temperature Dynamics and Control of a Water-cooled Fuel Cell Stack[J]. Journal of Power Sources, 2014, 256(6):470-478.
• [70] LI X, DENG Z H, WEI D, et al. Novel Variable Structure Control for the Temperature of PEM Fuel Cell Stack Based on the Dynamic Thermal Affine Model[J]. Energy Conversion&Management, 2011, 52(11):3265-3274.
• [71] HU P, CAO G Y, ZHU X J, et al. Coolant Circuit Modeling and Temperature Fuzzy Control of Proton Exchange Membrane Fuel Cells[J]. International Journal of Hydrogen Energy, 2010, 35(17):9110-9123.
• [72]谢雨岑,邹见效,彭超.基于变论域模糊增量理论的质子交换膜燃料电池温度控制[J].控制理论与应用, 2019,36(3):428-435.
• [73] LI D, LI C, GAO Z, et al. On Active Disturbance Rejection in Temperature Regulation of the Proton Exchange Membrane Fuel Cells[J]. Journal of Power Sources, 2015, 283(6):452-463.
• [74]陈飞,罗仁宏.基于模型预测控制的水冷型燃料电池冷却系统研究[J].汽车技术, 2021,(7):8-13.
• [75] ROJAS J D, OCAMPO-MARTINEZ C, KUNUSCH C.Thermal Modelling Approach and Model Predictive Control of a Water-cooled PEM Fuel Cell System[C]//Conference of the IEEE Industrial Electronics Society, Vienna:IEEE, 2013.
• [76] FAN Y, FU Y. Model Predictive Control for Multivariate PEMFC Stack Temperature System[C]//Asia-Pacific Power and Energy Engineering Conference. Chengdu:IEEE,2010.
• [77] LI A R, FU H, MADONSKI R, et al. Feed-forward Offsetfree Model Predictive Temperature Control for Proton Exchange Membrane Fuel Cell:An Experimental Study[J].ISA Transactions, Part B, 2022, 128(9):159-170.
• [78] YU S, JUNG D. Thermal Management Strategy for a Proton Exchange Membrane Fuel Cell System with a Large Active Cell Area[J]. Renewable Energy, 2008, 33(12):2540-2548.
• [79] HAN J, PARK J, YU S. Control Strategy of Cooling System for the Optimization of Parasitic Power of Automotive Fuel Cell System[J]. International Journal of Hydrogen Energy,2015, 40(39):13549-13557.
• [80] SAYGILI Y, EROGLU I, KINCAL S. Model Based Temperature Controller Development for Water Cooled PEM Fuel Cell Systems[J]. International Journal of Hydrogen Energy,2015, 40(1):615-622.
• [81]赵洪波,刘杰,马彪,等.水冷PEMFC热管理系统控制策略及仿真研究[J].化工学报, 2020, 71(5):2139-2150.
• [82] REZAEI M, MOHSENI M. A Predictive Control Based on Neural Network for Dynamic Model of Proton Exchange Membrane Fuel Cell[J]. Journal of Fuel Cell Science and Technology, 2013, 10(3):35001-35001.
• [83] ASENSIO F J, MARTIN J I S, ZAMORA I, et al. Analysis of Electrochemical and Thermal Models and Modeling Techniques for Polymer Electrolyte Membrane Fuel Cells[J]. Renewable&Sustainable Energy Reviews, 2019, 113(10):109283.1-109283.22.
• [84] SHAN Y Y, CHOE S Y. Modeling and Simulation of a PEM Fuel Cell Stack Considering Temperature Effects[J].Journal of Power Sources, 2006, 158(1):274-286.
• [85] ZHOU D M, BREAZ E, RAVEY A, et al. Dynamic Variable Coupling Analysis and Modeling of Proton Exchange Membrane Fuel Cells for Water and Thermal Management[C]//Applied Power Electronics Conference&Exposition.Long Beach, CA, USA:IEEE, 2016.
• [86] KIM S, JEONG H, LEE H. Cold-start Performance Investigation of Fuel Cell Electric Vehicles with Heat Pump-assisted Thermal Management Systems[J]. Energy, 2021, 232(10):121001.
• [87]顾洮,袁野.质子交换膜燃料电池仿真建模与分析[J].电源技术, 2021, 45(4):459-462.
• [88] ROJAS J D, KUNUSCH C, OCAMPO-MARTINEZ C, et al. Control-Oriented Thermal Modeling Methodology for Water-Cooled PEM Fuel-Cell-Based Systems[J]. IEEE Transactions on Industrial Electronics, 2015, 62(8):5146-5154.
• [89] MIN H T, CAO Q M, YU Y B, et al. A Cold Start Mode of Proton Exchange Membrane Fuel Cell Based on Current Control[J]. International Journal of Hydrogen Energy,2021, 47(8):5507-5520.
• [90] MENG H. Numerical Investigation of Transient Responses of a PEM Fuel Cell Using a Two-phase Non-isothermal Mixed-domain Model[J]. Journal of Power Sources, 2007,171(2):738-746.
• [91]周苏,郑岚,陈凤祥,等. PEMFC电堆内部水结冰、融化及冷启动过程的研究[J].电源技术, 2012, 36(7):976-980.
• [92] WANG Q Q, TANG F M, LI B, et al. Investigation of the Thermal Responses under Gas Channel and Land inside Proton Exchange Membrane Fuel Cell with Assembly Pressure[J]. Applied Energy, 2022, 308(2):118377.1-118377.16.
• [93] CAO T F, MU Y T, DING J, et al. Modeling the Temperature Distribution and Performance of a PEM Fuel Cell with Thermal Contact Resistance[J]. International Journal of Heat&Mass Transfer, 2015, 87(8):544-556.
• [94]柏兴应,简弃非,罗立中,等.均温板在质子交换膜燃料电池堆热管理中的应用[J].华南理工大学学报(自然科学版), 2021, 49(2):25-32.
• [95] ZHAO X Q, LI Y K, LIU Z X, et al. Thermal Management System Modeling of a Water-cooled Proton Exchange Membrane Fuel Cell[J]. International Journal of Hydrogen Energy, 2015, 40(7):3048-3056.
• [96] MOHAMED W A N W, TALIB S F A, ZAKARIA I A, et al. Effect of Dynamic Load on the Temperature Profiles and Cooling Response Time of a Proton Exchange Membrane Fuel Cell[J]. Journal of the Energy Institute, 2018,91(3):349-357.
• [97] LEE S K, ITO K, OHSHIMA T, et al. In Situ Measurement of Temperature Distribution across a Proton Exchange Membrane Fuel Cell[J]. Electrochemical and solid-state letters, 2009, 12(9):B126-B130.
• [98] ZHANG G Z, SHEN S L, GUO L J, et al. Dynamic Characteristics of Local Current Densities and Temperatures in Proton Exchange Membrane Fuel Cells During Reactant Starvations[J]. International Journal of Hydrogen Energy,2012, 37(2):1884-1892.
• [99] TANG Y Q, FANG W Z, LIN H, et al. Thin Film Thermocouple Fabrication and Its Application for Real-time Temperature Measurement inside PEMFC[J]. International Journal of Heat and Mass Transfer, 2019, 141(10):1152-1158.
• [100] LEE C Y, CHEN C H, CHIU C Y, et al. Application of Flexible Four-In-One Microsensor to Internal RealTime Monitoring of Proton Exchange Membrane Fuel Cell[J]. Sensors, 2018, 18(7):2269.
• [101] GUO H, WANG M H, LIU J X, et al. Temperature Distribution on Anodic Surface of Membrane Electrode Assembly in Proton Exchange Membrane Fuel Cell with Interdigitated Flow Bed[J]. Journal of Power Sources, 2015,273(1):775-783.
• [102] DAVID N A, WILD P M, HU J W, et al. In-fibre Bragg Grating Sensors for Distributed Temperature Measurement in a Polymer Electrolyte Membrane Fuel Cell[J].Journal of Power Sources, 2009, 192(2):376-380.
• [103] INMAN K, XANG X, SANGEORZAN B. Design of an Optical Thermal Sensor for Proton Exchange Membrane Fuel Cell Temperature Measurement Using Phosphor Thermometry[J]. Journal of Power Sources, 2010, 195(15):4753-4757.
• [104] PEI H C, LIU Z C, ZHANG H N, et al. In Situ Measurement of Temperature Distribution in Proton Exchange Membrane Fuel Cell I a Hydrogen-air Stack[J]. Journal of Power Sources, 2013, 227(4):72-79.
• [105] FRANCHI D, GONZATTI F, MIOTTO M, et al. Use of Infrared Matrix Sensor for Temperature Measurement and Monitoring of PEM/FC Stacks[J]. Sensors&Actuators A Physical, 2019, 293(7):119-127.
• [106]吴诗雨,梁荣亮,郭婷.燃料电池电动汽车热平衡测试方法研究[J].汽车文摘, 2022(9):33-37.